G Dev

Rust Statistics

ruststatistics.org · independent, not affiliated with Facepunch Studios

Offline · checked 21d ago · 121.200.6.90:28014

Abstract

We describe the public Rust server G Dev, reached at 121.200.6.90:28014. It is offline at the last check, against a seven-day mean of 0¹. It ranks #13,751 of all servers, the top 62%. It last wiped at an unknown time.

Keywordsrust server

Access. Launch Rust and join ‹ all servers

1Summary statistics

Table 1: The server at the last check, its week and its standing.

Measure	Value	Note
Players now	1/100	1% full
In the queue	0	no queue
Seven-day mean	0	peak –
Rank²	#13,751	top 62%
Last wipe	–	no schedule published
Next wipe³	–	no wipe seen yet

2Population

Figure 1 follows the players on the server at three scales: every five minutes over two hours, the hourly mean and peak over 48 hours, and the daily mean and peak over 90 days. Dashed uprights mark its wipes.

No hourly history yet.

Figure 1: Players on the server, UTC: (a) every five minutes, from the Steam server list; (b) hourly mean and peak; (c) daily mean and peak.

3Performance

We query the server directly for its frame rate, entity count and memory⁴. Low frames per second and a climbing entity count are what players feel as lag (Figure 2).

measure

range

This server has not answered a direct query in the last 48 hours.

Figure 2: Server performance. 48 hours: hourly readings. 30 to 90 days: one point a day, with the day's average and lowest fps, most entities and most memory.

4Rank

The server stands in the top 62% of all ranked servers. Rank is on player hours over the last seven days, and 1 is best; Figure 3 draws it day by day.

RankRank in region

Figure 3: Daily rank, overall and in its region; the axis is inverted, so up is better.

5Wipes

5.1Schedule

Not enough wipes seen yet to tell when the next one is. Every server wipes at the monthly force wipe.

5.2History

Table 2: Every wipe recorded, newest first.

Wiped (UTC)	Peak	Crowd	Lasted	Before
No wipe seen yet.

Peak: the most players in the first 48 hours. Crowd: whether every day of the wipe kept at least half that peak, or the day it fell below. Before: players just before it wiped. A new world less than six hours after a wipe is a restart, not a wipe of its own.

6Map and settings

Custom map, no picture published

Figure 4: The map: Custom Map.

Table 3: The server's published settings.

Address	`121.200.6.90:28014`
Region	–
Max players	100
Group limit	10 max
Wipe schedule	–
Last wipe	–
Hostname	–
First seen	29 Sep 2026
Map	Custom Map
Size	–
Seed	–

7Similar servers

Servers of the same kind of game, then region, group limit, rate and wipes. The lists this server belongs to are aim and ukn servers [2] and Rust wipe forecast [3].

Table 4: Similar servers: the same kind of game, then region, group limit, rate and wipes.

Server	Players
NA \| Apex Aim Arena \| 1v1 Facecheck FFA TargetsNA · groups of 8+ · 4 on average	0/16
Q1 - Aim Training / Matchmaking / Facechecks - EU MainEU · groups of 8+ · 4 on average	0/16
EU \| Deadzone Aimtrain \| Facechecks/1v1/SpeargunEU · groups of 8+ · 4 on average	0/16
Deadshot's Arena \| NA \| BedWars \| Aim Train \| Scrim \| Gun GameNA · groups of 8+ · 4 on average	0/16
･RUST KILL･XXX\|KILL $ CASH\|FARM\|SHOP\|TP\|HOME\|KITS\|PVPVEX10Xgroups of 10+ · weekly · 5 on average	7/100
MINICOPTER / HELICOPTER TRAININGgroups of 8+ · 5 on average	4/100

Appendix AQuick answers

From the figures on this page.

Server details

A.1What location does G Dev have?

A region is not published by G Dev. Where a server says it is: that is what Rust Statistics shows, without looking up where the machine stands. 121.200.6.90:28014 is its address.

A.2What is the reliability of G Dev, and is it online?

G Dev is currently offline, with the last sighting 21 days 1 hours ago. Its uptime over the last full days (7 days) was 0%, with 0 of 168 hours online. It was first observed on 29 September 2026 by Rust Statistics.

A.3What version of Rust is run on G Dev?

The version of Rust on G Dev is network protocol 2634 and build 166652, and the operating system is Windows. Steam updates your game for you, but you must be on the same protocol to join.

Wipe timing

A.4When are wipes carried out on G Dev?

Too few wipes by G Dev have been recorded to determine the pattern. Wiping is compulsory for every Rust server at the monthly force wipe, the next of which is Thursday 5 November at 19:00 UTC.

Player count

A.5What is the rank of G Dev among Rust servers?

The seven-day player-hours ranking puts G Dev at #13,751, within the top 62% of ranked servers.

A.6What is the population level of G Dev?

G Dev is not online now; 21 days 1 hours have passed since it was last seen.

Tags, lists

A.7What is the meaning of the tags on G Dev?

The game's server browser reads gmrust (Game mode): This is survival as standard Rust plays; mp100 (Max players): The slot count is 100; ts10 (Group limit): Teams are capped at 10; v2634 (Protocol): The game protocol is 2634; your client must match it to join; cs166652 (Build): Build 166652 is the one running; ptrak (Networking): The network layer is RakNet, standard for the game; $r? (Region code): A region code has not been set; ^d (Combat training): This is a training server: aim and PvP practice with loot provided; born-2147483648 (Custom tag): A non-standard tag, applied by the owner or a plugin, which G Dev publishes as its tags. Also in the tags: players now, the queue, and when the world was made; these appear at the top of this page.

A.8Where can G Dev be found among the Rust Statistics lists and filters?

The Rust Statistics lists that G Dev fits are: Rust aim training servers. You will find it on the server list filtered by: Type: Community (not modded, not official) and No plugins at all; Server tag: Combat training ^d; Group limit: 5 or more.

Settings and map

A.9Under what rules and settings does G Dev operate?

No gather rate appears in the name of G Dev. A group holds at most 10 players. combat training is the game mode here; aim and PvP drills, with loot provided. The server browser lists it under Community. The server has VAC on, Valve's anti-cheat.

Connection

A.10What steps are required to join G Dev?

Press F1 inside Rust to open the console and enter client.connect 121.200.6.90:28014. Alternatively, the Launch Rust and join control on this page launches the game via Steam and completes the connection.

Appendix BServer tags

What each of the server's tags means. Published as mp100,ptrak,$r?,v2634,^d,born-2147483648,gmrust,cs166652,ts10.

Table 5: The server's tags and their meanings.

Tag	Meaning
Game
`gmrust`	Game mode. This is survival as standard Rust plays.
`mp100`	Max players. The slot count is 100.
`ts10`	Group limit. Teams are capped at 10.
`v2634`	Protocol. The game protocol is 2634; your client must match it to join.
`cs166652`	Build. Build 166652 is the one running.
`ptrak`	Networking. The network layer is RakNet, standard for the game.
`$r?`	Region code. A region code has not been set.
Gameplay
`^d`	Combat training. This is a training server: aim and PvP practice with loot provided.
Other
`born-2147483648`	Custom tag. A non-standard tag, applied by the owner or a plugin.

Players now (cp), the queue (qp) and the wipe time (born) are in the tag string too; they change every few minutes and are shown at the top of the page. Flag meanings are Facepunch's.

References

[1]Rust Statistics. The Rust server list. ruststatistics.org/rust-server-directory.
[2]Rust Statistics. Aim and ukn servers. ruststatistics.org/top-rust-aim-training-servers.
[3]Rust Statistics. Rust wipe forecast. ruststatistics.org/rust-servers-wiping-today-list.